What is the cloak cutter?

Cutter Case is a tool used to cut off a part of the pipe or case in the hole. These tools can be used to cut or remove pipes from water, gas or oil wells. The covers for the covers are designed to encapsulate drilling and pumping mechanisms and support the soil around the well to prevent slipping. They are placed in a well during drilling and remain there because the materials are pumped from time to time. The case cutter allows workers to cut off this tube when the well reached the end of its life.

The standard cutter of the case consists of a heavy tube made of tungsten and steel alloys. It is equipped with internal cutting blades that remain hidden in the tube until the cutter is activated. Workers use ropes or cables to reduce the shell cutter to the right height in the hole. Once in place, the blades can be released to reduce the case. There are some circular blades that reach perpendicular to the walls of the tube. Others have the blades umFined on wings or flaps that open from the sides of the tube at an angle. Each of these systems can work using hydraulic or pneumatic power, allowing the case of the housing to generate the power needed to cut steel or iron.

These tools cut off the pipes from the inside and many of them rotate in the cover to ensure complete cut. When the cut is complete, the workers will pull the blade on the shell cutter and lift them from the well. It then removes the part of the housing that has been cut off during this process.

The case cutter serves as one of the simplest and most effective methods of removing existing layers. Over time, these pipes can become clogged or corroded. The case cutter allows workers to remove the tube and re -insert a new sleeve if it still works. They also allow companies to safely leave wells by removing as many mechanisms as possibleNisms of the case and surrounding mechanisms.

When choosing a sheath cutter, workers must select the largest cutter capable of inserting into the housing. This helps to ensure that the blades cut the pipes. It is also important to extend the cutting blades and turn the cutter far enough to cut the tube. Continue to spread blades or excessive cutting can damage the shell cutter and can even cause it to be stored in the well.