What is the plasterboard screw?
plasterboard is a type of building material made of gypsum and other minerals pushed between the leaves of heavy paper. It is installed on walls and ceilings using the type of fastener known as the screwdone screw. This connector can be used to secure plasterboard on wood or metal framing and is designed to minimize mute on the face of the walls. Traditional nails tend to leave small holes or Divots in plasterboard and can even relax over time. The drywall screws are threaded to grasp both plasterboard and frame members and provide much safer and long -lasting installation over time. This increment of 16 inches is the center of each framing member or shame. After installing all screws, the walls are terminated by a joint compound. The joint compound extends on the holes of the screws and the joints between each leaf. Once designed drying, walls can be smooth and painted.
The primary advantage of the bolts offered plasterArton is their heads. This means that the entire bolt lies flushing with the sheet surface and creates smooth and even finishing. The head of the panel also helps to prevent the drywall screw from breaking the surface of the paper, which is a common nail problem.
There are two basic types of drywall screw, of which the installer to choose from. Enter the "W" units or wooden screws, have wide, coarse threads. They are used for buildings framed wood, where their rough helps them safely grasp wood. The "S" type screws are designed for use with steel frame members. They have a sharp, notch head that can easily penetrate steel framing, as well as fine fibers that are designed to pass steel.
The plasterboard screws are a type of self -struggle, which means that this is not needed for preliminary holes. These bolts almost always have a Phillips head rather than a slot that POSIt flows further inspection for installation programs. Instead of a standard drill, the installation workers use a tool known as a drywall, which has an adjustable nose to install the drywall screw without tearing the paper on each sheet.
The standard plasterboard screw can be easily identified by its black finish. This black color comes from a phosphate mineral coating that is applied to these screws. This coating helps minimize rust and corrosion when the screws are exposed to a wet joint or color.