What is the foam cutter?

Foam cutter is a device, manual or electronic, used for cutting foaming materials such as polystyrene. This tool is also commonly referred to as a hot wire foam cutter. A hot wire foam can be made up of a thin tight metal wire, usually made of stainless steel, or to use a thicker measuring wire that has been made in advance to a specific shape. In both cases, the wire is electrically heated to approximately 400 degrees Fahrenheit (205 degrees Celsius). When the hot wire passes through polystyrene, the heat effectively evaporates the material just before the actual contact and creates a clean and direct cut. Hot wire cutters create clean, smooth edges in foam materials that cannot be duplicated using a knife or saw.

There are several types of hot-wire foam cutters that move widely in their sophistication. A simple hand cutter of the foam can consist of a stretched wire connected to the handle. The wire is manually guided by a larger piece of foam, aby cut out any desired free photo of RM. For larger objects or for more accurate foam cutting, a table cutter can be used. The foam cutting table can consist of a vertical or horizontal wire with a guide similar to a vice to hold the foam on the spot as it moves.

Usually used fans are vertical cutters useful to create small complex shapes. On the other hand, horizontal cutters are more suitable for creating their own packages and objects requiring longer uniform cuts. The bristle cutter, although still requires a manual operator, is best suited for creating multiple copies of the same shape with uniformity, although uniformity accuracy is still quite dependent on the user's skills.

computer numeric control (CNC) The cutter is by far the most accurate. Computer -controlled wizards move hot, tight wire and can form prismatic or tapering shapes. NThe CNC Hot-Wire Cutters are equipped with attachments of the lathe that allow cutting precise spiral shapes. Applications include creating molds for the production of ornamental and architectural objects such as large growers, as well as the railings of NeEZE and Balusters.

In addition to architectural shaping, the creation of film and theater props, aircraft wings, surf production and sculptural forms are also used in the creation of film and theater props. Fandoists can buy basic hot -water foam cutters with different sophistication for less than $ 100 in USD (USD), while commercial digital CNC models can run more than $ 10,000.