What is King Post?

Post King is part of a supporting structural element called Truss System, a framework used in the construction to support roof elements. The beauty consists of a horizontal beam connected to the ends to two rays, which in turn rise diagonally to meet each other at the top or the highest point of the triangle, with the King post from the center of the lower beam to the peak of the trussed beam. King Post Truss is the easiest form of a lattice system and is an effective support that is commonly used in buildings and bridges. In medieval Europe, the Romanesque and Gothic churches and the tenth barns in medieval Europe were apparent. King contributions or crown contributions were created at the end of the 13th century, after 1450 they became common. During this period, architectural styles represented rising ceilings and long, Aiased corridors. The ceiling architecture during this period was often seen. Royal contributions have accepted in addition to the structural function of decorativefunction. Over the next few centuries, this type of construction was increasingly common in large public buildings and smaller rural barns and parish churches, especially in the UK.

Structurally, King Posts helps to distribute the weight of the ridge to the other parts of the lattice beam and prevent the beam or the horizontal beam from preventing it. Two diagonal parts of the lattice beam serve as a roof rafter and a horizontal part is a ceiling beam. If two posts of the king are used side by side, each is called Queen Post.

Posts

king can also be used in the design of the bridge. Although the King Post system is highly efficient, it has its limitations. As the binding beam is extended, the lattice beam must be built in proportion to a higher, so it is unsuitable for a long span. Post King can only be used on short fabric bridges. On the bridge for a longer range can be added to anotherDiagonal support that forms a system of multiple King Post Truss.

In Aviation, King Post refers to vertical reinforcing columns used in wire monoplane and biplans at the beginning of the 20th century. In the 1920s, the columns of the king on Biplans used the wing pieces, because the vertical column gave Wing Walker something that would grasp during stunts. The use of King's contributions in aviation is still common, especially in ultralight and other guide decorated aircraft.