What is pulp?
pulp tray is an efficient wrapping element made of paper pulp. Products for pressed paper pulp are produced by reducing waste paper to pulp in a process that includes the addition of various agents increasing assets. The porous form is immersed in the pulp, where water is stretched through a strong vacuum. This caused the paper fibers in the pulp sticking to the outside of the mold, which effectively followed its form. Part of the formed paper is then removed from the mold, dried and wrapped for distribution.
The ubiquitous pulp magazine is one of the most common packaging materials in general use and is found in applications as diverse as inserts absorbing shocks into high -end electronic packages in fast food outlets. The products can be made to absorb or contain liquids and can be made in a wide range of shapes, colors and textures. The pulp content is also an excellent example of a green product because most of theIt is aimed at optimizing water use during production using recycled waste paper in the That. The process used to produce formed paper pulp items is also relatively simple, leading to excellent costs compared to other packaging solutions.
The process of producing the pulp of the pulp begins with a collection of waste paper, including wavy packaging and newspaper paper. The paper turns to the pulp by adding water and exposing the reduction process, during which stabilization and binding agents are added, such as soluble wax and aluminum sulphate. Once the pulp is ready, the form of the desired product is immersed. The molds are porous and connected to a strong vacuum source and a wastewater reticulation system.
As soon as it is immersed, a vacuum is activated that attracts water through the mold over its surface. This action causes paper fibers suspended in the pulp to holdOn the outside of the mold as water passes. The water that passes in the form is then collected and spreads back to the pulp reduction process for reuse. When the adhesive fiber layer reaches the desired thickness, the mold is removed from the pulp. The pulp content, which precisely mirrors the surface of the mold, can now be removed by means of a transmission mold and inserted into an electrical element or a fluid drying device where they are slowly dried in the readiness for distribution.