What is an offset screwdriver?

There are many variations on the standard screwdriver. The main reasons for the use of a non -standard screwdriver are tasks that a straight screwdriver cannot achieve, or for tasks that require more torque or power. The offset screwdriver is a range of screwdriver, which is used at a perpendicular angle from a traditional screwdriver. This offers a better angle for some tasks that could be embarrassing or even impossible with a normal screwdriver. This type of screwdriver can also offer an increased lever effect, making it easier to turn and remove screws that would otherwise be very difficult. The main difference of the offset screwdriver is that the end of the shaft has a turning of ninety degrees. Instead of twisting the screwdriver handles, which powered the screw in or out, the offset of the offset rotates like the hands of the clock and can be rotated both clockwise counterclockwise.

Simple offset screwdriver with glassIt is made of metal shaft with flathead or Phillips blade in the shape of "L" with a blade -oriented blade. Some offset screwdrivers may contain blades at both ends of the stopwatch, which usually protrude in opposite directions. In this variation, one of two blades can be a flathead screwdriver, while the other is Phillips head. They can also be different head sizes of the same style.

There are more complex types of screwdrivers and there will usually be a corresponding offset screwdriver for each. For example, some screwdrivers have removable blades that can be replaced by different sizes and types for different screws. The same type of offset screwdriver can be found, with a solid handle, but interchangeable blades. These are often sold as complete sets that contain Along screwdriver with a range of removable blade bits.

Another popular variant is a screwdriver from the ROHATKA compensation. When tightening the screw with it, the user does not have to disrupt the contact between the blade and the screw as the tool maintainThe blade is stationary when it is twisted in the opposite direction. This is also a handy function when working with screws, which in cramped areas where the radius is very small. These folkly contain interchangeable blades for increased usefulness and are built using a switch that reverse the direction of the ratcheting mechanism for switching between movements clockwise and counterclockwise.