What is the framing of the platform?
Framing platform is a method of construction used primarily in the applications of small structures, for example in the construction of houses or small housing complexes and buildings. Framing the platform name is derived from the way the construction is carried out. The process used is to build up from the foundation or platform.
In framing the platform, multiple platforms can be constructed on the top of the frame. Each platform provides vertical support for every level of building building. The amount of support provided depends on the parameters and capacities of the materials used and the way the building design has been distributed.
In most cases, framing the platform is a choice for the building of residential houses, as it allows an effective ascending design of residence. The foundation is set, either using the pressure of the lumber treated to prevent rot or through reinforced concrete slabs. This creates the first platform on which the residence will be built.
Once the foundation is built, you can in the platform atData the first floor of the building. This then allows the next platform to be built for two story houses. In two -storey houses, the roof can be built directly on the upper part of the first platform and frame.
Each platform frame is generally formed of the prescribed amount of lumber and hardware. The required amount of materials used for each platform level varies according to the building codes of each region regarding residential construction. For example, most codes require the Foundation platform to be equipped with a window sill.
Sill board provides a uniform surface on the platform. This surface allows consistent height for each vertical support or “shame” at the level of this platform. These studs are generally required by building regulations to be placed every 16 inches (40.64 cm). Edies are a means of providing sufficient stability to support another platform on the first bowlyou.
In the construction industry, where more platforms are built on the same base, each platform must be after the first position of the beams. The first beam to be implemented is The Rim Wiist. The rim is located on the side around the perimeter of the threshold for this platform, which was attached to the peaks of the first platform. This beam system is used to create a stable means for connecting floor beams, which form the Foundation for another platform, to the marginal beam to create a platform of the second floor.