What is the formation of the motherboard?

Motherboard pressing is wood lining that leads along the bottom of the inner walls. This lining decoratively fills the area where the wall and the floor meet. The moldings on the motherboard are available in a wide range of forests and styles. Finger connection is a popular process used for the production of moldings on the motherboard. All defects were removed during processing. Long and short lumber lengths are connected together to create very long lengths of thick strip lining. When purchasing pressing on the motherboard, lengths are longer than the length of the wall, so that the lining sections are allowed to waste. Today there are many different wood lining styles. The fourth round or forming of shoes is a popular type of motherboard. It has a somewhat oval wedge shape and it is basically the fourth or one quarter of the circle.

The motherboard pressing usually stands out from the wall rather than being flat. This helps to prevent damage to the wall from the vacuum. The moldings on the motherboard should be of good quality, so it is not formed or not suitable. This typeThe hem not only helps to protect the wall, but also adds a decorative and finished appearance to the interiors.

Crown forming is the upper decorative lining of wood on the walls, while the chair bar runs along the lower middle area of ​​the wall. While the crown press peaks or crowns the wall, the formation of the motherboard is a base or bottom of the inner walls. The chair strip is named for its traditional use of installation in kitchens at the height of the wall protection from the back of kitchen chairs. The colors and appearance of all three types of wood Moldings should coordinate together with the overall style of the room.

cases should also be coordinated with a motherboard and other types of forming. Packaging is a framing lining around the door and windows. While the formation of the motherboard is often smooth, the covers can be stuck or stamped, as well as plutted or raised.