What is a female clutch?
Woman clutch is half of the two -piece devices used to connect cables, pipes or hoses. Two -piece bonds consist of half of the male and women and can be equipped with a locking or screwing mechanism. The couplings used for hoses and pipes will have an open flow path through their center, while the bonds used for electrical connections will include pins and sockets to which the individual wire cores are connected. These devices are one of the more desired binding solutions and are also non -performance, allowing you to make fast accessories or repair the system.
cables, pipes and hoses or solid bars used in large systems will always require a connection at a certain point. A wide range of different methods are used to prepare these joints, one of which is the two -piece loseman. These devices consist of half of the male and female binding halves and are relatively cheap and easy to use. They also lend to any flexibility systemFast and effective disassembly for repars, additions or enlargement.
Two -piece bonds generally fall into two categories, namely those used for pipes and hoses and those used for electrical connections. For both types, the female custody program goes through the male component. In the case of hose fittings and pipes, both male and female clutch will contain an open flow path that will match the connection, allowing non -copying passage of fluids or gases with minimal binding loss. Electric cable couplings usually have a number of pins and corresponding sockets located in half of males and women. These connect when the two halves are connected and ensure continuity between the two cables.
Connection is achieved in different ways depending on the clutch design. The cracked fittings have an inner thread on the inner surface of the ŽENA clutch. The male clutch will then have an outer thread of a similar pitch. When the two halves are screwed together, they lock firmly and ensure a tight and safe joint.
Pressure fitting uses different locking mechanisms. These include spring rings or ball bearings in the female clutch, which is locked behind the corresponding protrusion on the male clutch. This type of mechanism is widely used in hoses and pipes with rapid release. Lock cards are commonly used to secure electrical links that consist of slots on a female clutch with the corresponding cards on the male coupling, which lock to the slots when connected.