What is the Rat Council?

Rat-rays is a circular device that is often used to split or combine radio frequency and microwave signals. The size of the wire ring is usually equal to the wavelengths of one and a half and there are four ports that are separated by 90 °. The output signals are sometimes subject to the 180 ° phase shift, which means that the shape of the wool on the graph moves a certain distance based on the size of the change.

also called a hybrid clutch, the device usually does not cause any negative effects on calibration and the function of the current receiver. Ports on the rank of races are generally placed one quarter of the wavelength apart. These ports are usually placed on the upper half, while the bottom of the ring runs for three -quarters of the wavelength without inputs or outputs. If the signal enters Port One, it will usually be divided between the second and fourth port; The third port will usually be insulated from the signal path.

cowerler rat can also be used as a distributor that keeps the signalLy in Phase. The third port is often isolated, but with a Four port as an input will sometimes be insulated. In another configuration, the first and third ports can be isolated apart. Unevenly divided rats clutch usually pair four segments, each operating on specific impedance or levels of resistance to electric or signal currents. Signal and frequency bandwidth are usually dependent on these types of patterns.

high -performance signals can usually go through a rat budger without losing force. The device can also combine signals that are mixed and divide those coming from amplifiers and which need to be picked up by certain types of receivers. It is often suitable for use with signal distribution systems in buildings.

Although it is possible to split the output signals is outside the phase, the rat-rated binder usually combines two signals in the phase or distributes the signal without a phase difference. Signals may not even be compared by any structural components. These types of bindings areOften part of the connection between the antenna and the transmitter and the possibility of usually saving costs compared to the device that can perform similar tasks. The Ratan's Retain Function function is often described mathematically, so understanding how the signal performance is calculated can help determine the best configuration that can be used.